Diamond Manufacturers in Hyderabad, Chennai, Noida

Diamond Manufacturers in Hyderabad, Chennai, Noida

Diamond Manufacturers in Hyderabad, Chennai, Noida

Diamond Manufacturers in Hyderabad, Chennai, Noida are the leading manufacturers offered by WINWIN Diamonds Products. We offer best services for Diamond Manufacturers in Hyderabad, Chennai, Noida. Electroplated Diamond Wheels Manufacturers are the outcome of a technical know-how that gets about optimal tool performance provided that fast cutting without losing their long lifecycle. They are manufactured Resin Bond, Electro Deposited, and PCD-PCBN Diamond Cutting Tools such as Diamond Lapping, Diamond Dressers, Diamond Slitting Saws / Wheels, Paste, Diamond files, Diamond / CBN Internal Grinding Pins, Diamond OD Grinding Segments, Diamond ID Grinding Wheels, and many more with Global quality ethics but offered at highly reasonable prices allowing them to give optimal yet low cost cutting.

Over the years, with developed acquaintance and experience and with its obligation to its clients through superiority products, rapid deliveries and reliable and quick response to its client needs, Win Win has received itself a distinction of The company’s strong knowledge alignment providing the “lowest cost cutting” without negotiating on any aspect of eminence.and backing comes from its loyal team of technically qualified engineers who contribute with innovation and zest into the production, maintenance, quality control and servicing departments of the company.

WINWIN Diamonds Products are the result of a technical know-how that brings about optimum tool performance providing fast cutting without sacrificing their long lifespan.

They are manufactured Electro Deposited, Resin Bond, and PCD-PCBN Diamond Cutting Tools such as Diamond Dressers, Diamond Lapping Paste, Diamond files, Diamond Slitting Saws / Wheels, Diamond OD Grinding Segments, Diamond ID Grinding Wheels, Diamond / CBN Internal Grinding Pins and many more with International quality standards but offered at highly economical prices enabling them to give optimum yet low cost cutting.

They are manufactured Electro Deposited, Resin Bond, and PCD-PCBN Diamond Cutting Tools such as Diamond Dressers, Diamond Lapping Paste, Diamond files, Diamond Slitting Saws / Wheels, Diamond OD Grinding Segments, Diamond ID Grinding Wheels, Diamond / CBN Internal Grinding Pins and many more with International quality standards but offered at highly economical prices enabling them to give optimum yet low cost cutting.

Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Hyderabad,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Chennai,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida,Diamond Manufacturers in Noida

Diamond Manufacturers in Delhi, Faridabad, Gurgaon

Diamond Manufacturers in Delhi, Faridabad, Gurgaon

Diamond Manufacturers in Delhi, Faridabad, Gurgaon

Diamond Manufacturers in Delhi, Faridabad, Gurgaon are the leading manufacturers offered by WINWIN Diamonds Products. We offer best services for Diamond Manufacturers in Delhi, Faridabad, Gurgaon. Electroplated Diamond Wheels Manufacturers are the outcome of a technical know-how that gets about optimal tool performance provided that fast cutting without losing their long lifecycle. They are manufactured Resin Bond, Electro Deposited, and PCD-PCBN Diamond Cutting Tools such as Diamond Lapping, Diamond Dressers, Diamond Slitting Saws / Wheels, Paste, Diamond files, Diamond / CBN Internal Grinding Pins, Diamond OD Grinding Segments, Diamond ID Grinding Wheels, and many more with Global quality ethics but offered at highly reasonable prices allowing them to give optimal yet low cost cutting.

Over the years, with developed acquaintance and experience and with its obligation to its clients through superiority products, rapid deliveries and reliable and quick response to its client needs, Win Win has received itself a distinction of The company’s strong knowledge alignment providing the “lowest cost cutting” without negotiating on any aspect of eminence.and backing comes from its loyal team of technically qualified engineers who contribute with innovation and zest into the production, maintenance, quality control and servicing departments of the company.

WINWIN Diamonds Products are the result of a technical know-how that brings about optimum tool performance providing fast cutting without sacrificing their long lifespan.

They are manufactured Electro Deposited, Resin Bond, and PCD-PCBN Diamond Cutting Tools such as Diamond Dressers, Diamond Lapping Paste, Diamond files, Diamond Slitting Saws / Wheels, Diamond OD Grinding Segments, Diamond ID Grinding Wheels, Diamond / CBN Internal Grinding Pins and many more with International quality standards but offered at highly economical prices enabling them to give optimum yet low cost cutting.

They are manufactured Electro Deposited, Resin Bond, and PCD-PCBN Diamond Cutting Tools such as Diamond Dressers, Diamond Lapping Paste, Diamond files, Diamond Slitting Saws / Wheels, Diamond OD Grinding Segments, Diamond ID Grinding Wheels, Diamond / CBN Internal Grinding Pins and many more with International quality standards but offered at highly economical prices enabling them to give optimum yet low cost cutting.

Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Delhi,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Faridabad,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon,Diamond Manufacturers in Gurgaon

Cbn Wheels and Tools Manufacturers in Jamnagar, Jaipur, Baroda

Cbn Wheels and Tools Manufacturers in Jamnagar, Jaipur, Baroda

Cbn Wheels and Tools Manufacturers in Jamnagar, Jaipur, Baroda
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Delhi, Faridabad, Gurgaon, mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Jamnagar, Jaipur, Baroda rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Jamnagar, Jaipur, Baroda dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Delhi,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Faridabad,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon,Cbn Wheels and Tools Manufacturers in Gurgaon

Cbn Wheels and Tools Manufacturers in Ambala Cantt, Bhopal, Mumbai

Cbn Wheels and Tools Manufacturers in Ambala Cantt, Bhopal, Mumbai

Cbn Wheels and Tools Manufacturers in Ambala Cantt, Bhopal, Mumbai
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Ambala Cantt, Bhopal, Mumbai , mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Ambala Cantt, Bhopal, Mumbai rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Ambala Cantt, Bhopal, Mumbai dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Ambala Cantt,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Bhopal,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai,Cbn Wheels and Tools Manufacturers in Mumbai

Cbn Wheels and Tools Manufacturers in Bahadurgarh, Jodhpur, Jalandhar

Cbn Wheels and Tools Manufacturers in Bahadurgarh, Jodhpur, Jalandhar

Cbn Wheels and Tools Manufacturers in Bahadurgarh, Jodhpur, Jalandhar
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Bahadurgarh, Jodhpur, Jalandhar, mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Bahadurgarh, Jodhpur, Jalandhar rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Bahadurgarh, Jodhpur, Jalandhar dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Bahadurgarh,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jodhpur,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar,Cbn Wheels and Tools Manufacturers in Jalandhar

Cbn Wheels and Tools Manufacturers in Nasik, Aurangabad, Mysore

Cbn Wheels and Tools Manufacturers in Nasik, Aurangabad, Mysore

Cbn Wheels and Tools Manufacturers in Nasik, Aurangabad, Mysore
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Nasik, Aurangabad, Mysore, mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Nasik, Aurangabad, Mysore rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Nasik, Aurangabad, Mysore dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Nasik,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Aurangabad,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore,Cbn Wheels and Tools Manufacturers in Mysore

Cbn Wheels and Tools Manufacturers in Goa, Pune, Ahmedabad

Cbn Wheels and Tools Manufacturers in Goa, Pune, Ahmedabad

Cbn Wheels and Tools Manufacturers in Goa, Pune, Ahmedabad
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Goa, Pune, Ahmedabad, mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Goa, Pune, Ahmedabad rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Goa, Pune, Ahmedabad dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Goa,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Pune,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad,Cbn Wheels and Tools Manufacturers in Ahmedabad

Cbn Wheels and Tools Manufacturers in Pondicherry, Hosur, vappi

Cbn Wheels and Tools Manufacturers in Pondicherry, Hosur, vappi

Cbn Wheels and Tools Manufacturers in Pondicherry, Hosur, vappi
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Pondicherry, Hosur, vappi, mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Pondicherry, Hosur, vappi rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Pondicherry, Hosur, vappi dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Pondicherry,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in Hosur,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi,Cbn Wheels and Tools Manufacturers in vappi

Cbn Wheels and Tools Manufacturers in Chandigarh, Coimbatore, Bangalore

Cbn Wheels and Tools Manufacturers in Chandigarh, Coimbatore, Bangalore

Cbn Wheels and Tools Manufacturers in Chandigarh, Coimbatore, Bangalore
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Chandigarh, Coimbatore, Bangalore, mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Chandigarh, Coimbatore, Bangalore rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Chandigarh, Coimbatore, Bangalore dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Chandigarh,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Coimbatore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore,Cbn Wheels and Tools Manufacturers in Bangalore

Cbn Wheels and Tools Manufacturers in Hyderabad, Chennai, Noida

Cbn Wheels and Tools Manufacturers in Hyderabad, Chennai, Noida

Cbn Wheels and Tools Manufacturers in Hyderabad, Chennai, Noida
FIELDS OF APPLICATION
( Cutting / Grinding / Grooving / Polishing / Lapping / Ultra High Speed Grinding )

METAL WORKING :
General Production components, Cbn Wheels and Tools Manufacturers in Hyderabad, Chennai, Noida, mechanical seals, Bearing seats & pivots, ceramic components, fuel injection valves, Hydraulic & pneumatic components, pump glands, etc.

TOOL ROOMS :
Press tools, tablet punches, test blocks, gauges, plastic moulds, slide surface, etc.

WIRE DRAWING :
Tungsten carbide dies, rolls, guides etc.

ELECTRONICS:
Semi-conductor wafers, laser rods, tape heads, Computer memory discs, radar tracking discs, etc.

OPTICS:
Contact lens moulds, stainless steel mirrors, Perspex prisms, etc.

LABORATORY:
Metallurgical, Geological, and Refractory specimens, Crystallography, Fiber optics etc.

PETROCHEMICALS :
Pump faces, valves seats, spinerettes , wear blocks etc.

AERONAUTICS :
Seal Plates of jet engines, hydraulic valves , spacer , etc.

SHIP BUILDING :

Diesel injector valves , pumps glands & seal factors, aluminium mirrors, etc.

DIAMOND NEEDLE FILES:

Diamond Files are offered in the form of Needle Files, Riffler Files, Diprofil Files in the normal sizes . Machine files also can be supplied against customer’s specifications.

GRIT SIZES:
Coarse : 80/100 – Medium : 140/170 – Fine: 200/230

FILE DIMENSION::
Thin Flat files of 1mm and 1.5mm Thickness can also be supplied as per customer’s requirements

DIAMOND/CBN MOUNTED POINTS:
Electroplated Diamond / CBN Mounted points are used in Bore polishing of collect holding systems. CBN Mounted points are recommended for grinding materials of more than 45 HRC. Different Coating lengths will be provided as per customer’s requirement.

DIAMOND SLITTING SAWS:
Electroplated Diamond saws are advised for using in the manufacture of brake linings, Asbestos, Fibre and Reinforced plastic, Hard Plastics, Carbon industries etc. Metal Bond saws are suitable for sawing and slitting Tungsten carbide. Ceramics, Quartz, Glass etc. Slitting saws from 30mm dia to 650 mm dia can be supplied.

DIAMOND DRESSERS:
Diamond Dressers are made of Diamonds that have supreme hardness and high wear resistance. Available types are Single Point , Multi Point , Impregnated, Blade Type, Chisel Point, Cone Type and Indexable Crown, Cluster Diamond Dressers with shanks / holders as per customer’s specifications.

Manufacturers of single Point & Multi Point Dressers, Indenters, Diamond Powder & Paste and Diamond Grit impregnated Dressers
Single Point Diamond Dressers
In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.

Manufactured using high quality raw diamond that is selected with utmost precaution, Win Win single point diamond dresser is formed by either mounting a natural diamond or a bruted diamond at the top of the tool by using a special adhesive. The diamond used in a single point diamond dresser is selected on the basis of the following parameters:

  • Dimension of the grinding wheel
  • Grit size
  • Abrasive type

This tool is available in various sizes with the size and quality of the mounted diamond depending upon its usage. The range of single pint diamond dressers offered by us is available in sizes ranging from 0.50 Carat to 5.00 Carat. Depending upon the varying sizes of these single point diamond dressers, they can be used for soft wheels, medium hardness wheels and very hard type of wheels.

Guidelines While Using WIN WIN Single Point Diamond Dresser

To use the tool to its optimum level, it would be wise to keep the following guidelines in mind:

  • Win Win diamond dresser should be mounted firmly into the holder and, the distance between the diamond and the clamp should be reduced to the least, so as to avoid the diamond from getting ruptured due to vibration.
  • Ensure that the diamond tool is never directed at an angle which is opposite to the direction of the rotation of the grinding wheel. To maintain a sharper point, it is essential to check that a drag angle of approximately 10 degrees to the horizontal wheel radius, pointing in the direction of Cbn Wheels and Tools Manufacturers in Hyderabad, Chennai, Noida rotation is maintained.

  • It is important not to insert Win Win dressers into the grinding wheel at more than 0.001” (0.025mm) per pass. Cuts deeper than this may cause overheating and, thereby, result in excessive wearing of the diamond.

  • A fast traverse dressing rate will produce an open wheel, enabling removal of large stock. On the other hand, a slow traverse dressing rate will impart a finish on wheel which is appropriate for producing a good finish on the work piece.
  • In order to maintain a conical point, Win Win dresser should be rotated in the holder at an angle varying from 20 to 40 degrees.
  • To avoid cracking of the diamond, use ample amount of coolant wherever possible. Always make sure that before beginning with the cutting activity, the coolant is turned on.
  • In cases, where dry dressing is performed, do not apply the tool incessantly for longer time, in order to avoid high temperature. Allow the tool to cool naturally instead of doing it with the aid of a coolant. A sudden change in temperature can possibly cause fracture to the diamond, essentially not at the time of shock but in the future use of the tool.
  • A diamond dresser should never be worn down to the shank as this might result in dropping out of the diamond. Usually, a Cbn Wheels and Tools Manufacturers in Hyderabad, Chennai, Noida dresser mounted in a dressing tool has more hidden points which, if desired, may be used by Re-Setting.
  • A crucial point to be remembered is not to allow a large flat to develop on the cutting point as this may deteriorate the economic life of the diamond.

Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Hyderabad,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Chennai,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida,Cbn Wheels and Tools Manufacturers in Noida